Cooktop Repair
In Tyler, TX
Cooktops are supposed to be simple.
Turn the knob. Get heat. Cook dinner. But when it starts acting up, it can feel oddly stressful.
- ● One burner clicks nonstop.
- ● Another burner will not light.
- ● Electric zones heat only in the middle.
- ● Touch controls beep at you like an error.
If you are searching for cooktop repair Tyler homeowners can count on, you want two things: you want it safe, and you want it fixed without guessing.
Cedarline Appliance Repair provides cooktop repair in Tyler, TX for common gas and electric issues. We diagnose first, explain the cause in plain language, then we repair what makes sense.
Schedule Cooktop ServiceService Focus:
- Safe Diagnosis
- Plain Language
- Honest Repair
Quick safety check before you test anything
Cooktop issues are often minor. Some are not. Stop using the cooktop and call for help if you notice:
- ● A gas smell that does not go away
- ● Clicking with gas odor present
- ● Flames that look yellow, large, or unstable
- ● Burning plastic smells near controls
- ● Unit trips the breaker more than once
- ● Cracked glass on a glass top cooktop
If you smell gas, turn the knob off. Ventilate the room. Do not keep clicking the igniter. Then call a professional.
If the glass is cracked, stop using it. Heat and electricity do not mix well with cracked surfaces.
Cooktop vs stove vs range
People use these words interchangeably, which causes confusion when booking. Here is the simple version:
Cooktop Only
A cooktop is the surface only. No oven under it. This is usually installed directly into the countertop.
Stove or Range
Many people mean the whole unit: burners on top and an oven below. If your issue is on the whole range, see our Stove Repair page. For baking issues, see Oven Repair.
Common cooktop problems we fix in Tyler
Cooktops fail in patterns. That makes diagnosis faster. It also keeps you from replacing random parts.Common brands we run into in Tyler kitchens: GE, Whirlpool, Frigidaire, Samsung, LG, KitchenAid, Maytag
Cooktop keeps clicking
And it is annoying. Constant clicking often happens when the igniter system thinks it needs to spark. Moisture, spillover grime, or a misaligned cap can trigger it. A failing ignition switch is also a common cause.
Safe checks to try:
- ● Turn the burner off
- ● Dry the burner area fully
- ● Clean around the burner base
- ● Ensure the burner cap sits flat
One gas burner will not ignite
Sometimes it’s simple: misalignment or residue blocking ports. Sometimes it’s not: damaged electrodes, failing spark wires, or weak ignition modules. If you smell gas without ignition, turn the knob off immediately.
Flame is weak or inconsistent
Weak flame makes boiling take forever. It can come from restricted gas flow, dirty ports, or regulator/valve issues. We check flame behavior and confirm the repair that makes sense.
Heat is too hot or too low
On electric cooktops, this is often a failing infinite switch (knob models) or a control fault (touch models). It could also be a damaged radiant element or sensor issue. We test to see what it’s actually doing.
One zone works, another is dead
A single dead zone often points to a localized switch, element, or connection issue. Multiple dead zones signal a bigger control board or electrical problem. Diagnosis prevents guessing.
Glass top surface seems odd
Zones heating in rings, delayed heat, or cold spots? Some is normal by design; some signals failing elements or sensor problems. We compare performance to normal behavior for that style.
Touch controls beep or do not respond
Touch controls act strange with moisture, faults, or failing boards. We verify if it’s a real fault or just a lock mode, then give you clear options.
What you can check before you call
These checks are safe for most households and help you describe the issue clearly to us.
Gas Cooktop Pre-check:
- • Make sure the burner cap is seated correctly
- • Clean and dry the burner area
- • Try another burner to compare behavior
Electric Cooktop Pre-check:
- • Confirm the breaker did not trip
- • Note if one zone is dead or several are failing
Touch Control Pre-check:
Wipe the area dry and confirm the unit is not in lock mode.
Why diagnosis is easy to get wrong
Many cooktop issues share the same symptoms. A clicking cooktop can be moisture or a switch. Weak flame can be a dirty port or a regulation issue. Electric heat problems can be elements, switches, or boards.
Guessing wastes money.
We test and confirm instead. That is how Cooktop repair in Tyler should be handled.
Our cooktop repair process
You should never feel confused during a service call. Here is what we do.
Quick Intake
- ● Gas or electric & Brand/Model
- ● Symptom description & failure count
- ● Your location in Tyler area
Diagnosis
We inspect and test safely. We confirm the root cause. We do not guess based on one symptom.
Options
We explain: what failed, why, and what the repair changes. Then you decide. No pressure.
Restoration
We complete the repair and verify ignition, heating, and control behavior before we leave.
Clean Exit
We clean up and share a few simple tips.
Book NowTools we use for accurate diagnosis
Tools don’t fix the cooktop, but they help us diagnose correctly. We use:
- Digital multimeter for electrical
- Ignition testing for spark systems
- Gas leak detector for safety checks
- Manufacturer spec references
Local Tyler knowledge
Tyler homes vary—older kitchens in Azalea have tight cabinetry; newer South Tyler builds have modern touch controls. Cooktops installed over drawers or wall ovens change access safely. We plan for these variables to keep the visit smooth.
Pricing approach
Price depends on type, model, parts, and access. Upfront, we confirm symptoms and safety pre-checks. After diagnosis, we explain the root cause and get approval before continuing.
Repair or replace?
Repair makes sense when:
It is a wear part, the rest of the unit is stable, and the fix restores safe operation.
Replacement makes sense when:
Major control system failures repeat or repair cost approaches replacement value.
Why ignoring cooktop problems gets expensive
Damage over time
A system that keeps sparking wears components unnecessarily. It signals a fault that can escalate.
Unreliable cooking
Inconsistent burners make cooking a chore, forcing you to use one burner and causing uneven wear.
Electrical faults
Breaker trips and smells are warning signs. Do not keep resetting and trying again—it’s unsafe.
What People in Tyler Ask Out Loud
“Who fixes cooktops in Tyler, Texas?”
Cedarline provides cooktop repair in Tyler and nearby areas. Tell us if it is gas or electric.
“My cooktop keeps clicking, what do I do?”
Turn it off. Dry and clean the burner area. If clicking continues, schedule a diagnosis.
“Why will my gas cooktop not ignite?”
It can be a dirty burner, moisture, or ignition failure. If you smell gas, stop and call a professional.
Cooktop Repair FAQ
Ready to book
CookTop Repair Tyler?
That is how appliance repair in Tyler, TX should feel.
If you want this handled quickly, contact Cedarline and we will get you on the schedule.